-
€3.75–€6.23 Inc VatHMT Grub Screw for Magdrill Arbor
Grub Screw for Magdrill Arbor
Spare grub screws to suit virtually all standard Magnet drill arbors, fittings and components.
- €21.66 Inc Vat
HMT VersaDrive SDS+ Adapter
The VersaDrive SDS+ adapter is a unique accessory that enables the whole range of VersaDrive cutting tools to be used in SDS+ drills in rotary only mode.
- €23.35 Inc Vat
HMT VersaDrive Extension Arbor 300mm
The VersaDrive extension hole saw arbor is a unique power tool accessory for portable power tools that enables the whole range of VersaDrive cutting tools such as our range of hole saws to be extended for use as long series products in tight access applications.
- €24.87 Inc Vat
HMT B16 to 3/4″ Weldon Shank Chuck Adaptor
Magnet Drill Adapter for HMT103070 Chuck
- Precision ground steel
- Bright Finish
- Weldon 19.05mm fitting for all standard magnet drills
- B16 Male shank for Chuck & 19.05 Weldon Male shank
- €25.95 Inc Vat
HMT VersaDrive Impact Driver 1/4″ Adapter
High quality 1/4″ impact driver adapter for use with all standard 1/4″ drive impact wrenches. Converts all impact drivers for use with the VersaDrive Cutting Tool System
- €29.83 Inc Vat
HMT VersaDrive Magnet Drill Adapter
Fits into any standard 19.05mm / 3/4″ Magnet Drill Arbor.
Hard wearing Stainless Steel grub screws located at 3 points for ultimate tool holding accuracy.
63.5mm OAL; 19.05mm Weldon shank; 30mm OD.
- €38.24–€59.59 Inc Vat
HMT VersaDrive Quick Change Impact Adapter
High quality impact rated adapter to suit all VersaDrive Cutting tools.
Quick release action for ultimate convenience. Supplied with retention pin and ring. Square drive.
- €50.58 Inc Vat
HMT Magnetic Swarf Lifter
Quality HMT Magnetic Swarf lifter for safe and efficent removal of metal swarf from the cutting area.
- 400mm overall length
- Strong magnet with release handle
- €50.58 Inc Vat
HMT Heavy Duty Keyed Magnet Drill Chuck 1-13mm
Quality all-metal chuck & adapter intended for use in Magnet drills when used with standard straight shank twist drills.
- Takes drill bits up to 13mm shank
- High quality engineered construction
- B16 Female fitting
- Fit 103017 B16 Chuck Adapter to use in a Magnet drill
- €63.16–€70.12 Inc Vat
HMT VersaDrive Morse Taper Adapter
- Hard wearing Stainless Steel grub screws located at 3 points for tool holding accuracy.
- 3 x M8 grub screws used per adapter.
- Ideal for workshop use with radial arm drills & pillar drills.
- €71.51 Inc Vat
HMT Magnet Drill Adapter 19mm Male to 32mm Female
32mm to 19.05mm Broach Cutter Adapter for converting large diameter broach cutters (65mm+) supplied with a heavy duty 32mm Shank.
To be fitted directly into a standard 19.05mm Magnet Drill Arbor.
This Adapter also allows you to use large diameter broach cutters with extension Arbors.
- €73.51–€106.36 Inc Vat
HMT Magnet Drill Arbor Extension
High quality extension arbor from HMT, for improving access to deep drilling applications.
Extended pilot pin may be needed, ask for details. Can be mounted in series for extreme depth applications.
- Precision ground steel
- Bright Finish
- Will pass through hole diameters greater than 35mm
- €80.95–€84.10 Inc Vat
HMT Impacta Adapter
Converts ImpactaMag Reamers to 1/2″ or 3/4″ Drive impact reamer.
Supplied with retention pin and ring.
- €86.52–€177.02 Inc Vat
HMT Magnet Drill Arbor
Premium quality oil hardened and ground arbor to fit Morse Taper magnet drills and other drilling machines such as radial pillar drills.
- Precision ground steel
- Bright Finish
- Oil hardened and ground
Welding & Gas
Hardware
- Tools & Machinery
- Steel Supplies
- Key Clamps