-
€6.26 – €55.14 Inc VatHand Tap Metric Standard M2 to M24(choose size)
Our Hand Taps in Metric Standard are available in a Taper (starter tap) and Plug (middle tap).
There is seldom a requirement for a Bottom Tap (final tap) as a Taper tap will give you a very good thread if the tap is allowed to go the entire way through the hole. All taps & dies are high quality German manufactured tools from RUKO.
- €6.39 – €77.44 Inc Vat
Hand Tap UNC UNF or BSP 1/8 to 1 Inch(choose size)
Our Hand Taps in UNC UNF and BSP thread are available in a Taper (starter tap) and Plug (middle tap).
BSP = British Standard Pipe
UNF = Unified National Fine
UNC = UNified National Coarse
If you can’t find what you’re looking for on our site, drop us a quick line.
There is seldom a requirement for a Bottom Tap (final tap) as a Taper tap will give you a very good thread if the tap is allowed to go the entire way through the hole. All taps & dies are high quality German manufactured tools from RUKO. - €13.67 – €94.44 Inc Vat
Hand Tap Metric FINE M6 to M30(choose size)
Our Hand Taps in Metric FINE thread are available in a Taper (starter tap) and Plug (middle tap).
If you can’t find what you’re looking for, drop us a quick line.
There is seldom a requirement for a Bottom Tap (final tap) as a Taper tap will give you a very good thread if the tap is allowed to go the entire way through the hole. All taps & dies are high quality German manufactured tools from RUKO. - €16.21 – €100.85 Inc Vat
HMT VersaDrive Sheet Metal Impacta Drill Taps
Drill & Tap in one easy operation.
All VersaDrive™ Sheet Metal Impacta-DrillTaps can be used in any standard 1/2” drill chuck for cordless or pistol drill use, or adapter for use in a Magnet Drill or Impact Wrench.
- €17.97 – €215.08 Inc Vat
HMT ImpactaTaps Standard Metric Coarse Thread
15X Faster than Hand Tapping.
VersaDrive™ ImpactaTaps perform best when adapted for use with an Impact wrench for Tapping through holes.
However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench. - €21.18 – €77.38 Inc Vat
HMT VersaDrive ImpactaTap Metric Fine
15X Faster than Hand Tapping. Metric Fine Thread.
VersaDrive™ ImpactaTaps perform best when adapted for use with an Impact wrench for Tapping through holes.
However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench
- €21.18 – €79.26 Inc Vat
HMT VersaDrive ImpactaTap UNC Thread
15X Faster than Hand Tapping. UNC Thread.
VersaDrive™ ImpactaTaps perform best when adapted for use with an Impact wrench for Tapping through holes.
However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench.
- €25.47 – €105.27 Inc Vat
HMT VersaDrive Oversized Galv ImpactaTap
15X Faster than Hand Tapping. Oversized Metric Coarse Thread for Galvanised Bolts.
VersaDrive™ ImpactaTaps perform best when adapted for use with an Impact wrench for Tapping through holes. However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench.
- €37.13 Inc Vat
HMT VersaDrive ImpactaTap 3/8″ x 16 BSW Thread
15X Faster than Hand Tapping. BSW Thread.
VersaDrive™ ImpactaTaps perform best when adapted for use with an Impact wrench for Tapping through holes.
However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench.
- €43.50 – €86.52 Inc Vat
HMT VersaDrive ImpactaTap BSP Thread
15X Faster than Hand Tapping. BSP Thread.
VersaDrive™ ImpactaTaps perform best when adapted for use with an Impact wrench for Tapping through holes.
However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench.
- €54.63 – €252.77 Inc Vat
HMT VersaDrive Heavy Duty Impacta Drill-Tap
VersaDrive™ Heavy Duty Impacta-Drill Taps are primarily designed to be adapted for use with a reversible Magnet Drill to drill and tap heavy plate in 1 easy operation.
However, they can also be adapted for use with an impact wrench to enlarge and tap existing holes. Due the high rotational torque generated by larger thread sizes, Heavy Duty Impacta-DrillTaps are not recommended for use in a standard drill chuck.
- -19%
€145.20€118.05 Inc VatTerrax Thread Cutting Set M3 – M12
This is a 43-piece thread-cutting set; more commonly known as a tap & die set, HSS, ground.
One three-piece set each of hand taps M DIN 352 HSS, ground.
- -36%
€192.39€122.97 Inc VatRuko Tap Set 29-Piece M3-M12 (245003)
Ruko is a world leader in drilling and tooling manufacture.
This 29 Piece set of Hand Taps comes in Sturdy Metal Case.
- -33%
€235.95€157.40 Inc VatRuko Tap & Die Set 44-Piece M3 to M12 (245030)
This is a 44-piece thread-cutting set; more commonly known as a tap & die set, HSS, ground.
One three-piece set each of hand taps M DIN 352 HSS, ground.
Amazing value – Made in Germany.
Welding & Gas
Hardware
- Tools & Machinery
- Steel Supplies
- Key Clamps