• €3.81€6.33 Inc Vat

    HMT Grub Screw for Magdrill Arbor

    Grub Screw for Magdrill Arbor 

    Spare grub screws to suit virtually all standard Magnet drill arbors, fittings and components.

  • €9.04€167.90 Inc Vat

    HMT BioCut Blue Neat Cutting Oil

    Biocut Blue is a ultra high-performance cutting fluid designed for metal fabrication broaching, cutting, and drilling tasks.

     

    Ideal for use with hard materials or ultra-large or ultra-thick steel.

  • €10.27€141.45 Inc Vat

    HMT CarbideMax 40 TCT Magnet Broach Cutter

    CarbideMax TCT Broaching cutters are proven to halve the cost of hole broaching when compared to traditional HSS broach cutters.

     

    CarbideMax TCT Cutters offer an increased life expectancy of at least 4X the life of standard HSS cutters, or much greater under optimum conditions.

     

    Shank Size: 19.05mm / 3/4″; Total Length: 78mm

  • €10.64€116.30 Inc Vat

    HMT VersaDrive HSS Cobalt Drill Bits

    Simply the best long-life twist drill bits for Metal.

    All VersaDrive™ Drill Bits can be used in any standard 1/2” drill chuck for cordless or pistol drill use, or adapted for use in a Magnet Drill or Impact Wrench.

    Market leading fabricators drill bit with high spec of 8% Cobalt with full titanium coating

  • €11.56€128.97 Inc Vat

    HMT Speedlube Drilling & Tapping Spray Aerosol 500ml

    SpeedLube™ is a high performance lubricant suitable for machine or hand-held drilling, tapping, broaching and countersinking cutting tool applications across a wide range of metals including stainless steel.

    Aerosol propellant ensures the lubricant foams on contact to ensure maximum tool coverage and heat dissipation. Easy one-handed provides fast, efficient lubricant coverage and minimises the amount of applications required during the drilling process.  Unique 360º valve which enables Speedlube to be sprayed from all angles.

  • €12.55€127.80 Inc Vat

    HMT MultiSink System

    The MultiSink™ is a worldwide unique new Combination Countersink Tool designed and developed by HMT for use with Magnetic Drills. 

    It allows the user to combine the tool with the VersaDrive product range to Broach & Countersink, Drill & Countersink, Tap & Countersink or even Drill, Tap & Countersink in one operation – providing huge time-saving benefits.

    The MultiSink™ can be fitted into Morse Taper arbors with 19.05mm / 3/4″ Shank fitting for use in pillar drills and radial arm drills.

    Check out the video below to find out more about what this system can do for you.

  • €12.79€175.15 Inc Vat

    HMT CarbideMax 55 TCT Magnet Broach Cutter

    The CarbideMax™ 55 Series will broach up to 50mm thickness of metal : 4X LONGER LIFE AND 15% FASTER CUT THAN HSS CUTTERS.

     

    • Fits any standard magnet drill
    • Premium quality Tungsten Carbide Tips
    • Special teeth geometry for fast, quiet cut
    • Reduced chatter
    • Large range of sizes and depths available
    • Total Length: 92mm
  • €12.85€58.36 Inc Vat

    HMT HSS SilverMax Weldon Twist Drill Bits

    HSS-XE twist drill bits with integrated magnet weldon shank for simple and accurate drilling in steel and fast tool changing.

    Removes the need for using tool chuck in a magnet drill. Where drilling smaller holes or tapping size holes has been a long and time consuming job in the past, fitting the Silvermax Magnet Twist Drills into a magnet drill can suddenly make the job far quicker and safer than struggling with a pistol drill and jobber drills.

  • €14.64€206.33 Inc Vat

    HMT VersaDrive Countersink Bits 90º

    HMT are the first company on the market to develop a countersink that can be used in an impact wrench as well as used in any standard drill chuck or magnetic drill.

    Utilise the convenience and power of an impact wrench to quickly debur and countersink holes up to 16.5mm with minimal torque kick-back against the operator.

  • €15.25€151.29 Inc Vat

    HMT VersaDrive CarbideMax TCT Holesaw

    A highly versatile Tungsten Carbide Holesaw system for use with a range of power tools including hand drills, Mag Drills and Pillar Drills.

    The perfect heavy duty Holesaw for fabricators and steel erectors needing to drill through heavy steel in locations that aren’t suitable for a mag drill.

  • €16.48€102.52 Inc Vat

    HMT VersaDrive Sheet Metal Impacta Drill Taps

    Drill & Tap in one easy operation.

    All VersaDrive™ Sheet Metal Impacta-DrillTaps can be used in any standard 1/2” drill chuck for cordless or pistol drill use, or adapter for use in a Magnet Drill or Impact Wrench.

  • €18.27€218.63 Inc Vat

    HMT ImpactaTaps Standard Metric Coarse Thread

    15X Faster than Hand Tapping.

    VersaDrive™ ImpactaTaps perform best when adapted for use with an Impact wrench for Tapping through holes.
    However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench.

  • €19.13€226.57 Inc Vat

    HMT AeroPaste Aerosol Spray Lubricant 500ml

    AeroPaste™ is an aerosol applied paste-type aerosol lubricant for hole broaching, tapping, reaming & drilling applications.

    Ideal for overhead or positional application, the high viscosity of AeroPaste™ allows it to cling directly to the cutting tool or steel it is applied to, without fluid run-off.  A preferred lubricant for use in environmentally sensitive areas such as above water. Using AeroPaste™ minimises repainting or galvanising issues caused by conventional soluble lubricants and reduces mess and slipping hazards.

  • €21.53€78.66 Inc Vat

    HMT VersaDrive ImpactaTap Metric Fine

    15X Faster than Hand Tapping. Metric Fine Thread.

    VersaDrive™ ImpactaTaps perform best when adapted for use with an Impact wrench for Tapping through holes.

    However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench

  • €21.53€80.57 Inc Vat

    HMT VersaDrive ImpactaTap UNC Thread

    15X Faster than Hand Tapping. UNC Thread.

    VersaDrive™ ImpactaTaps perform best when adapted for use with an Impact wrench for Tapping through holes.

    However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench.

Subscribe To Our Newsletter

We send a monthly Newsletter, with offers, product news and tips.
Email address
Secure and Spam free...