Jasic 270 Amp MIG Welder Multi-Process – Single Phase, Separate Wire Feed
The Jasic MIG 270 is an advanced single phase inverter providing rugged, reliable performance. The machine accommodates a full size gas cylinder, and has a modern 4 roll wire feed unit.
Includes MIG torch, trolley, interconnecting cable, gas regulator, work return lead & clamp.
- Technical Data
- Paul Says...
- Reviews (1)
- Ask ProWeld?
Jasic 270 Amp MIG Welder Multi-Process,
Single Phase, Separate Wire Feed.
- High power 230V machine.
- IGBT MIG MAG/MMA Inverter.
- Digital amp and voltmeter.
- High duty cycle.
- Advanced control circuitry.
- Burn back control & wire inching.
- Suitable for 0.6, 0.8, 1.0 and 1.2mm wire.
- 2T/4T trigger function.
- Power & status LED’s.
- Gas check function.
- Variable inductance.
|Input Voltage (Single Phase)||230V AC 50/60 Hz|
|Input Fuse (A)||60|
|Current Range (A)||MMA – 20-270 | MIG – 10-270|
|Mig Voltage Range (V)||11 to 29|
|No-Load Voltage (V)||54|
|Wire Speed||0-16 m/min|
|Duty Cycle||270A @ 30%|
|Dimensions (mm)||760 x 365 x 585|
I’ve done a few demo’s on this machine now and it is very impressive for a single phase Mig. It will burn 1.2mm mild steel wire at about 60% power. It looks complicated but the MIG function is controlled entirely from the Separate wire feed- Unless you want to use 4T. Adjust wire speed and volts to get your ideal setting. The first knob on the main unit is for MMA amperage. The next 2 knobs adjust crater fill when used in 4T. The inductance knob on the right can be adjusted to reduce spatter from the weld but this is not of great importance either.
Personally I was really impressed with its capabilities, very good value.
Got a Question for Us?
If you have an enquiry or question on this product, please fill out the form below and one of our experienced advisers will be more than happy to help with your query.